 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Milwaukee Nibbler 6890, 16 Gauge Nibbler
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8
positions to make cutting easier.
Milwaukee Nibbler 6890, 16 Gauge Nibbler
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8
positions to make cutting easier. A .87 in. starter hole is all that is needed to start or start from the edge of the material. A
nibbler is also what you need if you are cutting corrugated metal. The 6890 nibbler can cut 16 gauge steel and 18 gauge
stainless. When perfect cuts are what you need, look to the Milwaukee line of nibblers.
Milwaukee Nibbler 6890, 16 Gauge Nibbler
Indexing Die Holder Allows For Eight Cutting Positions
Cuts Square Or Round And Deep Corrugated Metal
No Adjustments For Straight Or Curved Cuts
Starting Hole Required .87"
AC-DC Paddle Switch For One-Handed Operation
Milwaukee Nibbler 6890, 16 Gauge Nibbler
Capacity Steel: 16 Ga.
Capacity Stainless: 18 Ga.
Punch Width: .200
Volts: 120 AC-DC
Amps: 3.8
Strokes per Minute: 1,900
Minimum Cutting Radius: 1-3/4"
Length: 11-1/4"
Weight: 4.75 lbs.
Shipping Weight: 6.25 lbs.
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8
positions to make cutting easier.
Milwaukee Nibbler 6890, 16 Gauge Nibbler
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8
positions to make cutting easier. A .87 in. starter hole is all that is needed to start or start from the edge of the material. A
nibbler is also what you need if you are cutting corrugated metal. The 6890 nibbler can cut 16 gauge steel and 18 gauge
stainless. When perfect cuts are what you need, look to the Milwaukee line of nibblers.
Milwaukee Nibbler 6890, 16 Gauge Nibbler
Indexing Die Holder Allows For Eight Cutting Positions
Cuts Square Or Round And Deep Corrugated Metal
No Adjustments For Straight Or Curved Cuts
Starting Hole Required .87"
AC-DC Paddle Switch For One-Handed Operation
Milwaukee Nibbler 6890, 16 Gauge Nibbler
Capacity Steel: 16 Ga.
Capacity Stainless: 18 Ga.
Punch Width: .200
Volts: 120 AC-DC
Amps: 3.8
Strokes per Minute: 1,900
Minimum Cutting Radius: 1-3/4"
Length: 11-1/4"
Weight: 4.75 lbs.
Shipping Weight: 6.25 lbs.
Milwaukee Nibbler 6890, 16 Gauge Nibbler
Additional Shear and Nibblers
- Milwaukee 6852-20, This new shear comes with a powerful 6.8 amp Milwaukee built motor.
- Milwaukee 6850, With its variable speed and 4 amp motor, it handles solid 18 gauge capacity in steel, 20
gauge in stainless. - Milwaukee 6805, 16 Gauge Shear - This fast cutting 16 gauge Shear can handle the toughest jobs, you can
even cut stainless steel up to 18 gauge - Milwaukee 6815, 14 Gauge Shear, This fast cutting 14 gauge Shear can handle the toughest jobs, you can
even cut stainless steel up to 16 gauge. - Milwaukee 6880, 10 Gauge Nibbler, A nibbler uses a punch and die to make the cut, this is perfect for tight
radius cuts into steel - Milwaukee 6890, 16 Gauge Nibbler, A nibbler uses a punch and die to make the cut, this is perfect for tight
radius cuts into steel
