 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Milwaukee Electromagnetic Drill Press Motor 4253-1
1/2 inch Motor for Electromagnetic Drill Press, 600 RPM - The 4253-1 electromagnetic drill motor features 6.2 amps and
a 1/2 in. chuck turning at 600 rpm. This motor is best used on the 4202 fixed position base
Milwaukee Electromagnetic Drill Press Motor 4253-1
From the Manufacturer
The 4253-1 electromagnetic drill motor features 6.2 amps and a 1/2 in. chuck turning at 600 rpm. This motor is best used
on the 4202 fixed position base. Light weight and ample power make this a good choice for smaller holes into steel.
Product Description
This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2 in. drill motor. All
you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee Electromagnetic Drill Press Motor 4253-1
1/2 inch capacity, 6.2 amp motor, 600 RPM
1/2-inch keyed chuck
Taps up to 5/8-inch/18 threaded hole. 5/8-11 and 1/2-13 taps not recommended
Develops up to 1650 pounds of drill point pressure with a 1-inch steel plate
Milwaukee Electromagnetic Drill Press Motor 4253-1
Voltage: 120 AC Only
• Drill Capacity: 1/2 in.
• Amps: 6.2
• No Load Speed: 600 RPM
• Tap Capacity: 5/8 in.-18
• Drill Point Pressure: 1,610/1,650 lbs.
• Chuck or Taper: Chuck
1/2 inch Motor for Electromagnetic Drill Press, 600 RPM - The 4253-1 electromagnetic drill motor features 6.2 amps and
a 1/2 in. chuck turning at 600 rpm. This motor is best used on the 4202 fixed position base
Milwaukee Electromagnetic Drill Press Motor 4253-1
From the Manufacturer
The 4253-1 electromagnetic drill motor features 6.2 amps and a 1/2 in. chuck turning at 600 rpm. This motor is best used
on the 4202 fixed position base. Light weight and ample power make this a good choice for smaller holes into steel.
Product Description
This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2 in. drill motor. All
you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee Electromagnetic Drill Press Motor 4253-1
1/2 inch capacity, 6.2 amp motor, 600 RPM
1/2-inch keyed chuck
Taps up to 5/8-inch/18 threaded hole. 5/8-11 and 1/2-13 taps not recommended
Develops up to 1650 pounds of drill point pressure with a 1-inch steel plate
Milwaukee Electromagnetic Drill Press Motor 4253-1
Voltage: 120 AC Only
• Drill Capacity: 1/2 in.
• Amps: 6.2
• No Load Speed: 600 RPM
• Tap Capacity: 5/8 in.-18
• Drill Point Pressure: 1,610/1,650 lbs.
• Chuck or Taper: Chuck
| Milwaukee Electromagnetic Drill Press Motor 4253-1, 1/2 inch Motor for Electromagnetic Drill Press |
Additional Drill Press Motors
- Milwaukee Electromagnetic Drill Press Motor 4297-1, No. 3 MT Motor for Electromagnetic Drill Press, 250/500
RPM - Milwaukee Electromagnetic Drill Press Motor 4262-1, 3/4" Motor for Electromagnetic Drill Press, 350 RPM
- Milwaukee Electromagnetic Drill Press Motor 4292-1, No. 3 MT Motor for Electromagnetic Drill Press, 375/750
RPM - Milwaukee Electromagnetic Drill Press Motor 4253-1, 1/2 inch Motor for Electromagnetic Drill Press, 600 RPM
